1.
Check to see that you have received the following
parts:
NOTE: If you are uncertain of part description, refer
to exploded view illustration.
a. Fan motor assembly
b. One switch housing assembly
c. Five fan blades
d. One ceiling cover
e. Five blade flanges
f. One hanger ball/downrod assembly
g. One hanger bracket
h. One loose parts bag containing:
1. Sixteen M5 x 6 washer head
blade screws
2. One M6 x 14 flange screw
with lockwasher
3. One wood pendant
4. One coupling
5. Three wire connectors
6. Two threaded studs
7. Two lockwashers
8. Two knurled knobs
9. One clevis pin
10. One hairpin clip
NOTE: Place the parts from the loose parts bags in
a small container to keep them from being lost. If
any parts are missing, contact your local retailer or
catalog outlet for replacement before
proceeding.
2.
Remove the fan assembly from the protective plastic
bag. Place the fan assembly into the upper foam pad
with the top of the motor facing up.
The upper foam pad serves as a holder for the fan
during the first stages of assembly.
SWITCH CUP
ASSEMBLY
COUPLING
COVER
LOOSE PARTS
BAG
FAN MOTOR
ASSEMBLY
HANGER
BRACKET
FAN
BLADES
BLADE
FLANGES
CEILING
COVER
HANGER BALL/
DOWNROD
ASSEMBLY
3
emersonfans.com
Please contact 1-800-654-3545 for further assistance
U.L. Model No.: 52-ANT
1. Unpacking Instructions
This product is designed to use only those parts
supplied with this product and/or any accessories
designated specifically for use with this product by
Emerson Electric Co. Substitution of parts or
accessories not designated for use with this product
by Emerson Electric Co. could result in personal injury
or property damage.
WARNING
!
Do not install or use fan if any part is damaged or
missing. Call Toll-Free:
1-800-654-3545
WARNING
!
Before assembling your ceiling fan, refer to section on
proper method of wiring your fan (page 7). If you feel
you do not have enough wiring knowledge or
experience, have your fan installed by a licensed
electrician.
WARNING
!
This Manual Is Designed to Make it as Easy as Possible for You to Assemble, Install,
Operate and Maintain Your Ceiling Fan
Tools Needed for Assembly
One Phillips head screwdriver
One stepladder
One 5/16” blade screwdriver
One wire stripper
Materials
Wiring outlet box and box connectors must be of type
required by the local code. The minimum wire would be
a 3-conductor (2-wire with ground) of following size:
Installed Wire Length
Wire Size A.W.G.
Up to 50 ft.
14
50-100 ft.
12