Emerson AXP640-AC2-110VAC, Installation & Use Manual

Page: 88 / 190

AXP640 Shelf Installation
AXP640 Installation and Use (6806800M24E )
88
5.3 Installation Prerequisites
This section describes the prerequisites required for installation.
5.3.1 Equipment You Will Need
You will need the following to install the AXP640 six-slot shelf into an approved EIA 23" or
600mm x 600mm ETSI frame:
z
Torque wrench
z
Nut driver with 7/16mm socket
z
Multimeter
z
Phillips head screwdriver, #1
z
Front mounting brackets for an EIA 23" frame
5.3.2 Rack/Cabinet Cooling Guidelines
It is important to have sufficient open space at the front and rear of the shelf when installed in
a rack or cabinet. Depending on whether the enclosure has solid or vented doors will determine
the recommended open space required. Follow these guidelines for positioning the shelf to
allow for the optimal open space for the shelf air inlet and shelf air exhaust.
Do not obstruct the ventilation openings at the top, sides and back of the shelf.
Rack Mounting: Per ETSI 600mm x 600mm ETSI frame on integrated front frame mounting
ears.
Frame mounting brackets are required for a 23" EIA frame. Rear mounting
brackets are recommended in both instances for Central Office
Environment.
Each shelf requires 7U of space and effectively takes up 7U when mounted in
a rack.
Cable management trays are available for the front and the rear of the shelf.
Table 5-1 AXP640 Shelf Physical Characteristics (continued)
Characteristics Specifications