3-26
Horizontal Alignment
Laser Address Selection
From the Current Addresses screen you can review, read, and set the laser head
(Models 821500 and 822500 only) and the analyzer addresses. The Current
Addresses screen is reached by pressing the Laser Address Selection key on the
Laser Configuration screen.
Current Addresses Screen
From this screen only the addresses setup in the analyzer and not the addresses
setup in the laser heads themselves are displayed. To review the actual address setup
in Head A, with Head A turned on and Head B turned off, select Read Head A
Address. To review the actual address setup in Head B, with Head B turned on and
Head A turned off, select Read Head B Address.
Summary of Contents for 2130 RBM Consultant Pro
Page 6: ...vi ...
Page 20: ...1 8 Fixtures Case Layout top section ...
Page 90: ...3 10 Horizontal Alignment ...
Page 364: ...5 22 Straightness Measurements ...
