7
Installing the server in a rack or cabinet
SVR-D1U-R610 Installation and Replacement Guide
Installing the server in the cabinet
CAUTION
!
The enclosure is heavy and should be installed into a rack by two
people. To avoid personal injury and/or damage to the equipment,
do not attempt to lift and install the enclosure into a rack without a
mechanical lift and/or help from another person.
Before mounting the server to the rails, make sure the ball bearing
retainer sheath is locked forward, and the secondary security
plungers are in the default (down and locked) position
.
Figure 4
Location of the retainer sheath and secondary security plunger
Figure 5
,
, and
show how to install the server in the
rackmount cabinet:
1. From the front of the cabinet, align the inner rails attached to the
server with the mounting channels on the slide rails.
2. Slide the server halfway into the slide rails.
CL4349b
