EMC VNX5300 Block Hardware Information Manual Download | Manualshive

Page: 2 / 88

background image

EMC® VNX5300™ Hardware Information Guide

2

EMC® VNX5300™ Hardware Information Guide

About this document

This document provides an overview of the architecture, components, and features of
the VNX5300 platform. The specific aspects of the Block, File, and Unified VNX5300
platform and its major components include the front and rear connectors and LED
indicators on the 3U, 15 (3.5-inch) or 3U, 25 (2.5-inch) disk processor enclosure (DPE),
the standby power supply (SPS), the Control Station, the Data Mover Enclosure

1

(DME), and the 3U, 15 (3.5-inch) or 2U, 25 (2.5-inch) disk drive disk-array enclosure
(DAE).

Organization

The following describes the arrangement of the component descriptions presented in
this document:

◆

“Overview” on page 3

◆

“VNX5300 Block and File front and rear views” on page 4

•

“Front view” on page 4

•

“Rear view” on page 5

•

“Hardware features” on page 5

◆

“System component description” on page 9

•

“VNX5300 front view” on page 9

–

“DPE front views” on page 9

–

“Control Station front view” on page 13

–

“DME front view” on page 15

•

“VNX5300 rear view” on page 17

–

“Standby power supply rear view” on page 17

–

“DPE rear view” on page 20

–

“Control Station rear view” on page 32

–

“DME rear view” on page 37

–

“I/O modules” on page 41

◆

“Disk-array enclosure expansion” on page 57

•

“The 3U, 15 (3.5-inch) DAE front view” on page 58

•

“The 3U, 15 (3.5-inch) DAE rear view” on page 60

•

“2U, 25 (2.5-inch) DAE front view” on page 66

•

“2U, 25 (2.5-inch) DAE rear view” on page 67

◆

“Specifications” on page 73

◆

“Cabling” on page 75

1. The term Data Mover Enclosure is used throughout this guide. The term Data Mover

Enclosure is also referred to as a blade enclosure. These terms are interchangeable and
basically mean the same.

«
1
2
3
4
...
»

Summary of Contents for VNX5300 Block

























































































Reviews:

No comments

Related manuals for VNX5300 Block

Brand: VAF instruments Pages: 56

LightSpeed Appliance QLS250

Brand: Quantum Pages: 12

Brand: Xilica Audio Design Pages: 30

Brand: Qixiang Technology Pages: 16

EdgeLens INT10G8LR56

Brand: Garland Pages: 30

Enterasys Matrix 2G4082-25

Brand: Enterasys Pages: 58

Brand: Lutron Electronics Pages: 4

Brand: eWON Pages: 34

Brand: Patton Pages: 62

Brand: Rainbow Pages: 2

EtherLink 3C905C-TX

Brand: 3Com Pages: 96

Brand: Intercoax Pages: 2

Brand: Magma Pages: 2

Brand: Cypress Semiconductor Pages: 15

Air Live GW-300R

Brand: Ovislink Pages: 20

EZ Switch SMC-EZ1024FDT

Brand: SMC Networks Pages: 4

Brand: Microcomputer Systems Pages: 21

Brand: Fast Pages: 66

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands