Figure 17 Installing the bezel
CL5009
Replacing a power supply module
The power supply modules are accessible from the rear of the server. Before you begin
the procedure below to replace a faulted power supply module, review the section on
handling field replaceable units (FRUs).
Procedure
1. Locate the faulted power supply module.
Consult your product documentation on how to identify a faulted powers supply in the
server. A faulted power supply may have an amber LED indicator, which is visible from
the rear of the server.
2. Undo the retaining clip securing the module’s AC power cord, and unplug the cord.
3. While carefully pushing the green latch to the left on the faulted power supply
module, pull the supply out of the server by its handle (
).
Replacing a power supply module
19
