EMC DL3D 1500 Administrator'S Manual Download

Page: 84 / 238

EMC DL3D 1500 and DL3D 3000 Administrator’s Guide

Configuring and Managing Virtual Tape Libraries

Figure 10

Claiming media

Setting import/export behavior of media

Use the Behaviors pages to manage the import/export settings,
configure early tape creation, and configure barcode filters.

To access the Import/Export Behaviors page:

1. On the Configuration page, click PTT.

2. On the PTT page, click Auto Archive.

3. On the Auto Archive page, click Behaviors.

4. On the Behaviors page, click Import/Export.

The Import/Export Media page is divided into two sections - Import
Behavior

and Export Behavior.

Summary of Contents for DL3D 1500















































































































































































































































Search results

Summary of Contents for DL3D 1500

Reviews:

Related manuals for DL3D 1500

Brands by name

Popular brands

EMC DL3D 1500, Administrator'S Manual

Search results

Summary of Contents for DL3D 1500

Reviews:

Related manuals for DL3D 1500

Brands by name

Popular brands