EMC DL3D 1500, Administrator'S Manual

Page: 24 / 238

24 EMC DL3D 1500 and DL3D 3000 Administrator’s Guide
About the DL3D 1500/3000
Hardware components
This section describes the hardware components of DL3D 1500 and
DL3D 3000.
DL3D 1500 components
The DL3D 1500 rack includes the following base hardware
components:
◆
One Intel-based 2U appliance engine (server) that contains the
following:
• Four PCI-E slots and one PCI-X slot
• One compression card
• One quad port 4 Gb Fibre Channel (FC) adapter (HBA)
• One dual port GbE network interface card (NIC)
◆
One EMC CX3-10 storage system that contains the following:
• Two 4 Gb/s Fibre Channel connections from the DL3D server
to each back-end storage processor (SP A and SP B)
• One or more shelves of SATA (serial advanced technology
attachment) drives.
DL3D 3000 components
The DL3D 3000 rack includes the following base hardware
components:
◆
One Intel-based 2U appliance engine (server) that contains the
following:
• Four PCI-E slots and one PCI-X slot
• Two compression cards
• Two quad port 4 Gb Fibre Channel (FC) adapters (HBA)
• One quad port GbE network interface card (NIC)
◆
One EMC CX3-40F storage system that contains the following:
• Two 4 Gb/s Fibre Channel connections from the DL3D server
to each back-end storage processor (SP A and SP B)
• One or more shelves of serial advanced technology
attachment (SATA) drives.