EMC CX200-Series, Hardware Reference Manual

Page: 78 / 90

A-10
EMC CX200-Series DPE2 Hardware Reference
Technical Specifications and Operating Limits
IMPORTANT: If you are storing an SPS, do not store it longer than 6 months
or at a temperature exceeding 30
°
C without recharging it. When you retrieve
an SPS unit from storage, you should charge it by connecting it to ac power,
with its power switch in the on position, for at least 12 hours before putting it
into service or returning it to storage.
Standards Certification/Compliance
A stand-alone SPS has been tested and certified for compliance with
the international environmental and safety specifications listed
below. The SPS is marked to indicate such compliance and
certification as required.
Safety Standards
EMI Standards
Standard Description
EN 60950
Safety of Information Technology Equipment including Electrical
Business Equipment.
UL 1950
CSA 22.2 No. 950
CE Mark European EMC Directive & Low Voltage Directive Requirements.
Standard Description
FCC Part 15 Class B, Radio Frequency Device Requirements
ICES-003 Class B, Interference-Causing Equipments Standard - Digital Apparatus
CE Mark European EMC Directive & Low Voltage Directive Requirements.
VCCI Class B, Voluntary Control Council for Interference
AS/NZS 3548 Class B, Electromagnetic Interference - Limits & Methods of
Measurement of ITE
CNS13438 BSMI EMC Requirements