EMC Connectrix ED-64M, User Manual

Page: 88 / 476

4
4-2
Connectrix ED-64M User Guide
Monitoring and Managing the Director
Using the Hardware View
The Hardware view is the default view that appears when you open
the Product Manager. Using this graphical view of the director, you
can view status symbols and simulated LEDs, display data, monitor
status, and obtain vital product information for the director and its
hardware components.
To display the Hardware view from some other view in the Product
Manager, click the Hardware tab.
Identifying FRUs Move the cursor over parts of the director graphic in the Hardware
view to display pop-up labels identifying each hardware component
and its slot position in the chassis relative to identical components
installed in the director.
FRUs include:
◆
Up to 16 port cards. Acronyms that might appear to identify port
technology will also appear in the FRU column of the FRU List.
Refer to Using the FRU List on page 4-39 for details.
◆
Two Control Processor (CTP) cards.
◆
Two power supply modules.
◆
Two cooling fan modules.
◆
Two serial crossbars (SBARs).
Monitoring Director
Operation
This section describes the ED-64M Status table and status symbol
(shown below), which indicate the operating status of the director:
Status Table
Status Symbol