EMC Connectrix ED-64M, User Manual

Page: 423 / 476

E
show
E-89
Command Line Interface
Output Example The output from show.nameServerExt is similar to the following:
Type, Port Id, Port Name, Node Name, COS, FC4 Types,
SymNodeName, SymPortName,
N, 010400, 00:11:22:33:44:55:00:77,
20:11:22:33:44:55:66:77, 2-3, 2, Node Name A, Port
Name A,
N, 010500, 00:11:22:33:44:55:01:77,
20:11:22:33:44:55:66:77, 2-3, 0, This Is Symbolic Node
Name B, Symbolic Port Name B Is Slightly Longer
N, 010600, 00:11:22:33:44:55:66:02,
20:11:22:33:44:55:66:77, 2-3, 2, , ,
FL, 000001, 00:11:22:33:44:55:66:03,
20:11:22:33:44:55:66:77, 2, 0, Loop Node 1, Loop Port
7,
FL, 000002, 00:11:22:33:44:55:66:04
20:11:22:33:44:55:66:77, 3, 2, Loop Node 2, Loop Port
7,
show.port.config
Syntax
config
Purpose This command shows the port configuration for all ports.
Parameters This command has no parameters.
Command Example
Root> show port config
Output The port configuration attributes are displayed as a table that
includes the following properties.
◆
Port — The port number.
◆
Name — The name of the port as set in the config.port.name
command.
◆
Blocked — The blocked state of the port as set in the
config.port.blocked command.
◆
Ext Dist — The extended distance state as set in the
config.port.extDist command.
◆
Type — The port type as set in the config.port.type command.
◆
Speed — The port speed as set in the config.port.speed
command.
Output Example The output from show.system is similar to the following: