EMC Connectrix ED-64M, User Manual

Page: 416 / 476

E
E-82
Connectrix ED-64M User Guide
Command Line Interface
Output Example The output from show.eventLog is similar to the following:
Date/Time Code Severity FRU Event Data
---------------- ---- -------- ----- ----------------------------------
04/12/01 10:58A 375 Major CTP-0 00010203 04050607 08090A0B 0C0D0E0F
04/12/01 09:58A 385 Severe CTP-0 00010203 04050607 08090A0B 0C0D0E0F
04/11/01 07:18P 395 Severe CTP-0 00010203 04050607 08090A0B 0C0D0E0F
show.features
Syntax
features
Purpose This command displays a table of all installed feature sets and their
states. The output is exactly the same as the output to
config.features.show
.
Parameters
This command has no parameters.
Command Example
Root> show features
Output The features data is displayed as a table that includes the following
properties.
Output Example The output from the show.features command displays as follows.
Installed
Feature Set The feature set installed using a feature key.
Only installed keys are displayed.
Feature Individual features within each set. In many
cases, there is only one feature within each
feature set.
State The state of the individual feature. Fabric-wide
features are displayed as Active/Inactive.
Switch-centric features are displayed as
Enabled
/Disabled.
Installed Feature Set
----------------------------
Open Systems Management Server
Enterprise Fabric Extensions
Enterprise Fabric Extensions
Enterprise Fabric Extensions Feature
---------------
OSMS
Fabric Binding
Switch Binding
Enterprise Fabrics State
----
Enabled
Active
Enabled
Active