EMC Connectrix ED-64M, User Manual

Page: 401 / 476

E
perf
E-67
Command Line Interface
◆
Busied Frms — The number of times that FBSY was returned to
this port as a result of a Class 2 frame that could not be delivered
to the other end of the link. This occurs if either the fabric or the
destination port is temporarily busy.
◆
Rjct Frames — The number of times that FRJT was returned to
this port as the result of a Class 2 frame that was rejected by the
fabric.
Output Example The output from perf.class2 is similar to the following:
perf.class3
Syntax
class3 portNumber
Purpose This command displays port Class 3 counters for a single port.
Parameters This command has one parameter.
Command Example
Root> perf class3 2
Output The port Class 3 counter data is displayed as a table that includes the
following properties.
◆
Port — The port number.
◆
Rx Frames — The number of Fibre Channel Class 3 frames the
port has received.
◆
Tx Frames — The number of Fibre Channel Class 3 frames the
port has transmitted.
◆
Rx Words — The number of Class 3 4-byte words within frames
the port has received.
Port 2 Statistic
-----------
RxFrames
TxFrames
RxWords
TxWords
Busied Frms
Rjct Frames Wrap
----------
23
12
65
32
0
0 Count
----------
2953184
1842953
2953184
1842953
2953184
1842953
portNumber
Specifies the port number to be reset. Valid
values for the ED-64M are 0 through 63.