EMC Connectrix ED-64M, User Manual

Page: 383 / 476

E
The config Branch
E-49
Command Line Interface
◆
Insistent Domain ID — When enabled, ensures that the
embedded firmware cannot change a switch's preferred domain
ID.
◆
Domain RSCN — When enabled, allows domain RSCNs to be
sent to registered members of the fabric.
◆
Zoning RSCN — When enabled, allows zoning RSCNs to be sent
to registered members of the fabric.
Output Example The output from config.switch.show command appears as in the
following example:
config.switch.zoningRSCN
Syntax
zoningRSCN zoningRSCNState
Purpose This command determines whether fabric-format RSCNs will be sent
to ports on the director following changes to the fabric's active zone
set. (These changes include activating and deactivating the zone set,
or enabling and disabling the default zone.)
Refer to Suppress RSCNs on Zone Set Activations on page 5-8 for more
information.
This parameter is structured differently in different interfaces. To suppress
fabric-format RSCNs from the Product Manager or Embedded Web Server,
you enable the parameter Suppress RSCNs on Zone Set Activations. To
accomplish the same result from the CLI, you set zoningRSCN to disable.
BB Credit:
R_A_TOV:
E_D_TOV:
Preferred Domain Id:
Switch Priority:
Speed:
Rerouting Delay:
Interop Mode:
Insistent Domain Id:
Domain RSCN:
Zoning RSCN: 2
20
4
1
Principal
2 Gb/sec
Enabled
Open Fabric 1.0
Disabled
Enabled
Enabled