EMC Connectrix ED-64M, User Manual

Page: 368 / 476

E
E-34
Connectrix ED-64M User Guide
Command Line Interface
Output The port binding configuration is displayed as a table that includes
the following properties:
◆
Port number.
◆
port binding — Active or Inactive.
◆
Bound WWN — The WWN of the device that is bound to the
specified port. If this field is blank, no device has been bound to
the specified port.
Output Example The output of config.security.portBinding.show appears as in this
example:
config.security.switchBinding.addMember
Syntax
addMember wwn
Purpose This command adds a new member to the Switch Membership List.
A maximum number of 256 members may be added to the list.
Parameters This command has one parameter:
Root>
config security switchBinding addMember
AA:99:23:23:08:14:88:C1
config.security.switchBinding.deleteMember
Syntax
deleteMember wwn
Purpose
This command removes a member from the Switch Member List. The
user cannot remove a member that is currently logged in to the
director.
Port Number:
Port Binding:
Bound WWN: 4
Active
AA:99:23:23:08:14:88:C1
wwn
Specifies the switch or N_Port device WWN of
the member to be added to the switch
membership list. The value of the WWN must
be in colon-delimited hexadecimal notation (for
example, AA:00:AA:00:AA:00:AA:00).