EMC Connectrix ED-64M, User Manual

Page: 103 / 476

4
Using the Hardware View
4-17
Monitoring and Managing the Director
dialog box and the data speed has not been resolved between the
port and the attached device, or if the port and device are not
communicating.
◆
Fibre Channel Address — The port’s Fibre Channel address
identifier, except on E_Ports, for which this value does not apply.
◆
Port WWN — The port’s 16-digit World Wide Name (WWN).
◆
Attached Port WWN — The WWN of the node logged into the
port.
◆
Block Configuration — Blocked or Unblocked. Operation can be
blocked or unblocked through the Configure Ports dialog box or
through options on right-click menus in the port card view. Refer
to Using the Port Card View on page 4-14 and Configuring Ports on
page 5-19 for details.
◆
10-100 km Configuration — Extended distance buffering. This
can be enabled or disabled for the port through the Configure
Ports dialog box. Refer to Configuring Ports on page 5-19 for
instructions.
◆
LIN Alerts Configuration — This field indicates whether LIN
alerts are enabled or disabled. LIN alerts can be configured
through the Configure Ports dialog box. The default is for the
LIN alerts to be enabled.
◆
Beaconing — This field indicates the beaconing status for the
port. To enable or disable beaconing, right-click the port and
select Enable Beaconing.
◆
Link Incident — Description of the last link incident that
occurred on the port.
◆
Operational State :
• Beaconing
• Inactive
• Invalid Attachment
• Link Incident
• Link Reset
• No Light
• Not Operational
• Online
• Offline
• Port Failure
• Segmented E_Port
• Testing