EMC Connectrix EC-1100 System, User Manual

Page: 115 / 216

4
Configuring and Managing Zoning
4-23
Fabric Zoning
Figure 4-13
Deactivate Zone Set Dialog Box
2. Click Start at the bottom of the dialog box.
Messages appear in the Status area indicating the progress of the
command. Buttons on the dialog box are disabled until the
process completes.
When the process is complete, the Start button changes to a Close
button.
3. Click Close to close the dialog box.
Find Zones; Find and
Replace WWNs
Use the options in the Zone Sets dialog box to find zone sets that
contain a specific zone or WWN and replace a WWN in a specified
zone.
Find Zones
Use this option to get a quick view of which zones are in specific zone
sets.
1. In either the Zoning View or the Topology View, move your
cursor over the Configure icon and click Zone Sets on the pop-up
menu.
This displays the Zone Sets dialog box.
2. Click the magnifying glass icon next to a zone set to expand the
list of zones in the set. Click the magnifying glass icon next to a
zone to expand the list of members in the zone.
3. Select a zone.
4. Move the cursor over the Actions icon and click Find Zone on the
pop-up menu.