EMC-PARTNER EXTTRA3000 E, User Manual

Page: 98 / 162

TRANSIENT3000
98/162
6.5 Protocol Management
The TRA3000 F-S-D-V-C generates a test report (protocol) via the Webserver and Ethernet port.
The protocol can be customized to include users company logo and name in the header.
A test sequence (several linked tests) run on TRA3000 creates a sequence protocol that points to the
individual test protocols.
All protocols are stored in the TRA3000 F-S-D-V internal memory. The memory size is limited but sufficient
for normal operation. The user is presented with options how best to manage the test protocol data and
optimise TRA3000 F-S-D-V internal memory.
6.5.1 Customizing the Protocol Header
To enter the protocol menu, press F6 (Main) - and then F5 (Menu) twice, press F1 (Prot). Finally select F3
(Header).
display when "Main" has been
pressed display after pressing twice Menu after pressing "PROT." soft key
After pressing “Header” key
6.5.1.1 Changing fields in protocol header
Place the cursor on “Company” and press EDIT.
Place the cursor on “Operator” and press EDIT.
Enter the new information using the TRA3000 F-S-D-V keypad.
If GENECS-TRA has been purchased, character entry is diretly from the computer keyboard.
display when "EDIT" has been
pressed Enter data using the TRA3000
keypad. Changed data appears on the
display.
6.5.1.2 Changing company logo in protocol header
Load your company logo into the root directory of a USB stick. The file name and format MUST be
Companylogo.bmp (bitmap).
Place the USB stick into TRA3000 USB port on rear panel.
Press F5 (Copy from USB).
The file is loaded into TRA3000 F-S-D-V and appears on every protocol generated by the webserver.