EMBRON Hatteland HT20 70 Series, User Manual

Page: 64 / 154

64
IND100129-133
Specifications - JH C01MF A-A
1/2
This information may not, in whole or in part, be copied, photocopied,
reproduced, translated or reduced to any electronic medium or machine-
readable form without the prior written consent of Hatteland Technology
AS. The products may not be copied or duplicated in any way.
Dimensions might be shown with or without decimals and indicated as mm [inches]. Tolerance on drawings is +/- 1mm. For accurate measurements, check relevant DWG fi le.
DATASHEET
Hatteland Technology AS | www.hattelandtechnology.com | Enterprise no: NO974533146
USB Cable
Manufacturer: Hatteland Technology AS
Product: USB Cable 1m
Type: JH C01MF A-A
Last Revised: 16 Apr 2019
Revision#: 08
USB Cable (Type A plug to Chassis mount Type A receptacle) suitable for installations that feature a secure fastening connection from
external equipment with standard Type A ports to all Hatteland Technology computers and panel computers with standard USB Type
A ports. RoHS Compliant.
Description:
Specifications
• Waterproof Rate : IP67. (No Ingress of dust / Protected against harmful effects caused in 1 meter water within 30 minutes)
• Temperature Range : -20 ° C to +80 ° C
• Max Panel Thickness : 7.0mm (Without Cap Chain)
• Materials : Housing: Nylon, Black
: Conn.1: USB2.0-A, Jack
: Conn.2: USB2.0-A, Plug
: Cap: Nylon, Black
• Cable : 1m, UL2725 USB2.0, 28AWG*1P+24AWG*2C+AL+D+B, PVC Jacket, UV Resistant, Black 0D=ø5.5mm
• Receptacle Connector : USB-A Plastic C3 Panel Jack screw with pig tail (GT116300-30)
• Type Approval / Testing : Hatteland Technology standard, (tested / type approved by the following classification societies):
IEC 60945 4th (EN 60945:2002), IACS E10 , EU RO MR - Mutual Recognition
• Included with delivery : 1 x 218-N28 - Cable tie fastener w/glue Panuit 30
: 1 x B2-100 Black Cable tie 2,5x100mm
: 1 x GTC Waterproof Mating Cap P/N GT1C533122
ACCESSORY
FRONT VIEW
SIDE / TOP VIEW
WIRING DIAGRAM
FRONT VIEW
MATING CAP GT1C533122
PIN ASSIGNMENTS FRONT VIEW
RECOMMENDED PANEL CUTOUT