EMBRON Hatteland HT20 70 Series, User Manual

Page: 33 / 154

33
IND100133-82
2 x FRONT USB3.1 (<3m) INPUT/OUTPUT:
Supports any USB1.1 (12Mbps), USB2.0 (480Mbps) or USB3.1 (10Gbps) compliant peripherals. Drivers for most USB
devices are usually included in operating system or on separate installation CD’s delivered with Third Party prod-
ucts. USB 1.1 devices will operate in USB 1.1 mode (12 Mbps) and USB 2.0 devices will operate in USB2.0 mode
(480Mbps).
Power/Reset Combined Button:
To turn ON the computer, press down button and release it immediately. The Power LED indication riing will illuminate
green and the operating system will automatically boot. To turn OFF the computer, press down this button and hold it
for 3 seconds. The operating system may require additionally tasks to be performed before computer shuts down and
turns off the unit.
To reset the computer in case of severe software failure, press this button. This reset button is a hard reset which
means the operating system will NOT be warned. Using this reset method may damage files and / or operating system
in worst case scenarios. Precaution should be taken when using this. To perform a safe software reset, press either
the power button, or use the operating system own reset functionality if possible.
The Power LED Indication will illuminate static green when powered on. When power is off and the unit is turned off,
the LED will also off.
Front area of computer models
User Controls
2.5” Removable SSD/ Trays.
2-Bay model
4-Bay model
Reset Button
Power Button
Power LED
2.5” Removable SSD Trays.
USB3.1 USB3.1
Reset Button
Power Button
Power LED