EMBRON Hatteland HT20 70 Series, User Manual, Page: 20 / 154

20
General Installation Recommendations
Installation
IND100210-73
Housing / Terminal Block Connector Overview
Housing / Terminal Block connectors are available in different sizes (example 2-pin, 4-pin, 5-pin) which plug into the
connector area of the unit. They are mounted by factory default and delivered with the unit. The housing / terminal
block connectors have steering rails, which ensures that it can not be mounted wrong. The color of these connectors
may vary between black, green and orange depending on manufacturer. You may use approved equivalents of these
connectors, but note that the warranty will be void if any damage would occur to either the unit’s original PCB terminal
socket connector or inside the unit (electronic components, boards etc.). The table below is applicable for any
Series X products, such as Display and Panel Computers, including newer type of Stand-Alone Computers.
Illustration Pins Manufacturer Details Connector used for module
If your installation require additional cable fasteners support, please use the provided Cover Hood and Cable Housing
shipped with the unit for accessories (contents of package). Illustrations below are approximate, actual Housing and
Hood may deviate slightly, but function remains the same.
5-pin Cable Housing - Illustration 2-pin Cable Housing - Illustration 4-pin Cover Hood - Illustration
KGG-MC 1,5/ 5 (5-pin)
KGG-MSTB 2,5/ 2 (2-pin) BCZ 3.81 AH04 BK BX (4-pin)
For 5-pin:
“https://www.phoenixcontact.com/online/portal/us?uri=pxc-oc-itemdetail:pid=1834372&library=usen&pcck=P-11-02-01&tab=1”
For 4-pin:
“http://catalog.weidmueller.com/procat/Product.jsp;jsessionid=B040D5EB6832629E567C884809FDF6C1?productId=(%5b1005290000%5d)”
For 2-pin:
“https://www.phoenixcontact.com/en-gb/products/cable-housing-kgg-mstb-25-2-1803934”
Tx- Tx+ COM Rx- Rx+
5-pin MC 1,5/ 5-STF-3,81
Screwdriver: SZS 0,4X2,5mm
VDE, slot-headed.
Tightening torque min. 0.22 Nm.
Tightening torque max 0.25 Nm.
• RS-422 / RS-485 NMEA
(PCA200828-1 / PCA100293-1)
• Digital Input/Output (PCA100297-1)
Identifi ed on Hatteland Technology product datasheet as:
“Terminal Block 3.81”
4-pin BCZ 3.81/04/180F SN BK BX
Screwdriver: 0.4x2.5mm DIN 5264.
Tightening torque min.. 0.2 Nm.
Tightening torque max. 0.25 Nm.
• CAN Interface (ZIA0001310-B / ZIA0001310-SLCAN)
Identifi ed on Hatteland Technology product datasheet as:
“Terminal Block 3.81”
2-pin MSTB 2,5/ 2-STF-5,08 BK
Screwdriver: SZS 0,6x3,5, slot-
headed.
Tightening torque min. 0.5 Nm.
Tightening torque max 0.6 Nm.
• DC Power IN - Single Input
Identifi ed on Hatteland Technology product datasheet as:
“Terminal Block 5.08”