EMBRAVA Installation Guide for SRV Canada VRS
Congratulations on your purchase of the Embrava Blynclight.
If you ever had to wait in front of your computer for a call, you know how frustrating it can be.
No more!
The Embrava Blynclight flashes when you have an incoming Canada VRS call. You can choose
from several blinking colors and from models that use a wire (short distance) or wireless where
you can even be notified from the next room!
This guide will walk you through the steps of setting up your Embrava Blynclight.
I.
Unpack and Connect your Embrava Blynclight
1. Unpack the device from its packaging.
2. Connect the USB cable from your device into an available USB port on your PC.
3. (Optional) Peel off the protective coating from one side of the mount adhesive and attach
the adhesive to the bottom of the Blynclight device or mount. Ensure surfaces are clean
and free of dust before applying adhesive.
4. (Optional) Peel off the protective coating from the other side of the mount adhesive and
place your Blynclight device or mount in an appropriate position in view of your
surrounding colleagues. Ensure surfaces are cleaned and apply approximately 10
seconds of pressure when attaching mount to a surface.
Embrava
Installation
Guide
February 11, 2021