eMachines E4264, Reference Manual

Page: 22 / 124

Chapter 3: Setting Up and Getting Started
16
Connecting to a broadband
modem or network
You can connect your computer to a cable or DSL modem or
to a wired Ethernet network.
To connect to a broadband modem or to an Ethernet
network:
1
Insert one end of the network cable into the network
jack
on the back of your computer. For the location,
see “Back” on page 8 .
2
Insert the other end of the network cable into a cable
modem, DSL modem, or network jack.
Connecting a dial-up modem
Your computer may have a 56K modem that you can use with
a standard telephone line to connect to the internet or fax
documents.
To connect the modem:
1
Insert one end of the modem cable into the modem
jack
on the modem at the back of your computer. For
the location, see “Back” on page 8 .
2
Insert the other end of the modem cable into a
telephone wall jack. (The modem will not work with
digital or PBX telephone lines.)
3
If you want, you can connect a telephone to the PHONE
jack on the modem on the back of your computer.
Important
Your computer may be equipped with a built-in Ethernet (network) jack.
For information about setting up a wired or wireless Ethernet network, see the
online
User Guide .
Warning
To reduce the risk of fire, use only No. 26 AWG or larger
telecommunications line cord.
8512042.book Page 16 Monday, December 18, 2006 10:15 AM