ELZAB DE2106, Setting Manual, Page: 48 / 134

48 / 134
Continuous reading mode
After setting, the scanner is in continuous scanning state, without triggering, the reading
engine starts to read the code immediately. When the reading is successful, the
information is output or the single reading time is over, the reading engine will wait for a
period of time (settable) and it will start automatically Read the code once. If the following
conditions do not occur, the scanning engine will work in cycles as described above: the
user can also click the trigger button to manually pause the code reading during the code
reading process. Click the trigger button to read the engine and continue to read the code
cyclically.
Continuous reading mode
Continuous reading mode-single reading time
In the continuous mode, it refers to the maximum duration of continuous acquisition and
recognition before the reading is successful. After the timeout, it will enter the interval of
no acquisition and reading according to the setting. The setting range of the single
reading time is 1000~3600000ms, and the default time is 3000ms.
Quick setting of single reading time