ELZAB DE2106, Setting Manual, Page: 29 / 134

29 / 134
Chapter 2 Communication Settings
Introduction
When using this scanner to communicate with different hosts, you need to set the scanner
to the corresponding communication interface mode. You can set the scanner's functions
by scanning one or more setting bar codes. You can choose to use USB (USB-KBW, USB-
COM), TTL, RS232 serial communication interface modes, etc.
USB keyboard interface
The USB keyboard interface is the USB-KBW interface. When the USB data line is
connected, the scanner can be set to the USB-KBW input mode. In this mode, the scanner
will become a virtual keyboard, and the data receiving host accepts the virtual keyboard
input like a real keyboard input. The sending process after the scanner reads the code and
obtains the data is to hit each key corresponding to the data in the virtual keyboard.
The default scanner uses USB-KBW communication, simulating USB keyboard input mode,
no driver installation is required.
USB-KBW interface