Safety - ENGLISH
7
© 2022, Elon Group AB. All rights reserved.
General safety
DANGER!
Electrocution hazard!
Never turn on a malfunctioning product. If the product is malfunctioning, pull the power plug, switch off
the circuit breaker and contact the support.
•
A malfunctioning product may cause electric shock.
•
Water leaking into the product may cause electric shock.
•
Do not use high-pressure cleaners or steam cleaners to clean the product.
DANGER!
Risk of fire!
Do not place or store any objects on the hob when not using the hob for cooking.
WARNING!
If the power cord is damaged, it must be replaced by its manufacturer or its authorised technical service or a
qualified electrician, in order to avoid any dangerous situation.
WARNING!
In case of fire adjacent to the product, unplug the product and turn off the main switch.
Safety during installation
DANGER!
Use protective gloves during the installation of the product. There is a danger of physical injury due to
sharp edges.
WARNING!
•
The installation or maintenance of the product must be carried out by a qualified technician in
accordance with the manufacturer's instructions and in compliance with the local safety regulations.
•
To comply with current safety regulations, use a standard-compliant switch for the installation which
ensures complete disconnection of the network during overvoltage conditions.
•
Follow the stated facts in the regulations of the local competent authorities for safety measures and
technical measures to be adopted for smoke evacuation.
•
Do not plug in the product before the installation.
•
The power cord must be plugged into a grounded power outlet.
•
Do not use multiple sockets or extensions.
•
The power cord must be long enough to allow the product to be connected to the mains.
•
After completing the installation, the user should no longer be able to access the electrical components.
•
Make sure all parts are whole before installing the product. If there is a broken part, contact the
manufacturer and do not continue the installation.
•
Make sure that the electrical voltage and power values are compatible with the network and the
connection cord before connecting the product to the electricity network. In case of doubt, contact a
qualified electrical expert.
WARNING!
•
Do not connect the air outlet pipe of this product to air ducts which may contain smoke from other
sources, for example devices that use gas or other fuels.
