Installation - ENGLISH
19
© 2022, Elon Group AB. All rights reserved.
Installation without carbon filter
The absorbed air is cleaned by the grease filters and is discharged through a piping system.
Installation requirements:
CAUTION!
Exhaust air must not be transferred to;
•
An active smoke flue;
•
An active waste gas flue;
•
A flue used for ventilation of spaces where heat sources are installed.
•
If the installation requires transfer of exhaust air to an inactive smoke or waste gas flue, permission must be obtained
from an authorised chimney sweep.
•
If exhaust air is discharged through the external wall, a telescopic wall safe must be used.
•
Consult an authorised retailer to know the different opportunities available for flue connection. Accessories required
for flue connection can be bought from an authorised service provider.
Installation with carbon filter
The absorbed air is cleaned by the grease filters and an active carbon filter and is transferred back to the kitchen.
Installation requirements:
•
An active carbon filter must be installed, in order to catch substances which cause stink in the circulating air.
•
Consult an authorised retailer to know the different opportunities available for enabling the cooker hood to function in
circulating air mode. Accessories required for this process can be bought from an authorised service provider.
Install the hob
Make sure to mount the hob considering the measurements and other factors described in this section.
