1
IRC-B24 Infrared Remote Control
Specifications:
1. Power : Battery CR 2025, 3V
2. RANGE APPROX. : 6m
3. The default setting of this remote control is:
AUTO mode
LUX setting:
Maximum Sens
T1: 30”
T2: 30”
Safety Instructions:
Use this product only as intended. Changes or
modifications to the product or painting it will
result in loss of warranty.
Description:
The MODEL “IRC-B24” infrared remote control is compatible with motion detectors. It is used to
easily set different parameters and special functions. With a range of approx. 6m, quick and
precise programming can be done without tools or a ladder.
Initial operation:
A battery for the remote control is included in delivery.
Remove the protective foil between battery and contact before initial use.
For further information on programming, please refer to the operation
instructions for the device you are setting up.
Battery:
When battery is at normal status, press any key of the remote control, the indicator LED would
flash quickly for 0.2sec. (Note: Press T1 or T2 before choosing the desired delay time)
The setting of Lux/Sens/T1/T2 can be changed under any function mode, without switching the
mode to AUTO mode. That is, the latest selected function mode would remain unchanged while
adjusting those settings.
When battery is low, press any key of the remote control, the indicator LED would flash quickly
for 2 seconds max. This is to remind you of replacing battery. (Note: Press T1 or T2 before
choosing the desired delay time)
Make sure the polarity is correct when replacing battery.
Permanent ON or OFF for 10 hours.
The previous setting can be stored
and duplicated to other sensor
To read-in ambient light level
Short impulse of 1 sec ON and 9 sec
OFF; for T1/T2.
To start setting time value for Time 1.
To start setting time value for Time 2.
～
Time value for T1/T2.
Dusk-to-dawn mode.
～
Lux setting
Sensitivity setting
～
Auto mode
Alarm mode
Holiday Mode
Test mode
Battery: CR2025 , 3V
1.
2.
