Blind Sider-X2™ Feeder/Bait Light
Thank you for purchasing the Blind Sider-X2™ Feeder/Bait Light from Elusive Wildlife
Technologies, LP. Hunting or viewing wildlife after sunset is extremely exciting, yet very
challenging. The Blind Sider-X2™ provides just the right amount of illumination for you to
make your shot without spooking game. Motion activation watches for you and alerts you
when game is near. Designed to attach in a myriad of ways, the Blind Sider-X2™ is ultra
portable and versatile. Lighting up the night for your shot has never been easier.
If you have not already done so, please check your local game laws to ensure it is legal
to use an artificial light source while hunting or observing animals at night. Elusive Wildlife
Technologies, LP and its affiliates do not condone or promote the use of any of our
products as a means to illegally harvest any animal. Please take a moment to read these
instructions thoroughly before initial use. Also, reading the included helpful tips will ensure
you get the most out of your Blind Sider-X2™ and ensure your warranty remains in effect
for the full 12 month period.
FRONT
INSIDE
BACK
LED Light Emitters
Battery Compartment
( 4 D Cells )
Hinged Closure
Power Input Selector
1/4” Threaded Brass
Mounting Insert
Slotted Strap
Attachment
Cable Lock Channel
Battery Tray
For Solar Charging
External Power/Solar Input Plug
Day/Night Sensor
Motion Sensor
Time Duration Switch
Brightness Control
On-Off-Motion
Selector Switch
Open the hinged closures to access inside
of unit.
Select your desired mode of operation:
Brightness, Duration, On/Off/Motion, then
close the unit.
Insert (4) D Cell batteries with negative (-)
terminal facing upward on all batteries.
To remove batteries, push down with index
finger on bottom battery in window while
pulling up and out with thumb.
Position camera on tree with strap and
cam buckle or use 1/4” threaded inserts to
secure to a mounting device.
