ELTEX WEP-3ax, User Manual

Page: 38 / 78

WEP-3ax, WEP-3ax-Z. User manual
38
•
•
•
•
•
•
•
•
SSID – virtual wireless network name;
Broadcast SSID – when checked, SSID broadcasting is on, otherwise it is disabled;
Band Steer – when this flag is checked, the client's priority connection to the 5 GHz network is active. For
this function to work, you need to create a VAP with the same SSID on each radio interface, and activate
the "Band Steer" option on them;
VLAN Trunk – when the flag is set, tagged traffic is transmitted to the subscriber;
General Mode – when the flag is set, transmission of untagged traffic jointly with tagged traffic is
allowed (available when Trunk VLAN mode is enabled);
General VLAN ID – a tag will be removed from the specified VLAN ID and the traffic of this VLAN will
pass to the client without a tag. When traffic passes in the opposite direction, untagged traffic will be
tagged with General VLAN ID;
Station Isolation – when checked, traffic isolation between clients in the same VAP is enabled.
To apply a new configuration and save setting to non-volatile memory, click "Apply". Click "Cancel" to discard
the changes.
5.6.2 The "VAP" submenu
Common Settings
Enabled – when checked, the virtual access point is enabled, otherwise it is disabled;