ELTEX WEP-3ax, User Manual

Page: 28 / 78

WEP-3ax, WEP-3ax-Z. User manual
28
•
•
•
•
•
•
•
•
•
•
•
•
•
•
5.4.6 The "Network Information" submenu
In the "Network Information" submenu you can view common network settings of the device.
WAN Status:
Interface – name of the interface;
Protocol – a protocol which is used for access to WAN;
IP Address – device IP address in external network;
RX Bytes – number of bytes received on WAN;
TX Bytes – number of bytes sent from WAN;
Ethernet:
Link Status – Ethernet port status;
Speed – Ethernet port connection speed;
Duplex – data transfer mode:
Full – full duplex;
Half – half-duplex.
ARP
The ARP table contains information about the alignment between the IP and MAC addresses of neighboring
network devices:
IP Address – device IP address;
MAC – device MAC address.
Routes:
Interface – name of the interface;
Destination – IP address of destination host or subnet that the route is established to;