WEP-2L. User manual
20
•
•
•
•
•
•
•
•
•
•
•
Tx
BW
– transmission bandwidth, MHz;
Rx
BW
– reception bandwidth, MHz;
Uptime
– Wi-Fi client connection uptime.
To display more detailed information on a particular client, select it from the list. A detailed description includes
the following options:
Total TX/RX, bytes
– the number of bytes sent/received on the connected device;
Total TX/RX, packets
– the number of packets sent/received on the connected device;
Data TX/RX, bytes
– the number of data bytes sent/received on the connected device;
Data TX/RX, packets
– the number of data packets sent/received on the connected device;
Fails, packets
– the number of packets sent with errors on the connected device;
TX Period Retry, packets
– the number of retries of transmission to the connected device in the last 10 s;
TX Retry Count, packets
– the number of retries of transmission to the connected device during the entire
connection;
Actual TX/RX Rate, Kbps
– the current traffic transmission rate at the moment.
5.4.2 The «Traffic Statistics» submenu
The
«Traffic Statistics»
section displays the diagrams of the speed of the transmitted/received traffic for last 3
minutes, as well as statistics on the amount of transmitted/received traffic since the access point was turned on.
The LAN Tx/Rx diagram shows the speed of the transmitted/received traffic via the access point's Ethernet
interface in the last 3 minutes. The diagram is automatically updated every 6 seconds.
The WLAN0 and WLAN1 Tx/Rx diagrams show the last 3 minutes rate of transmitted/received traffic via Radio 1
and Radio 2 access point interfaces. The diagram is automatically updated every 6 seconds.
