WEP-2L. User manual
14
a.
b.
c.
a.
b.
4 Installing WEP-2L
The device should be attached to plain surface (wall or ceiling) in accordance with the safety instruction and
recommendations listed above.
The device delivery package includes required mounting kit to attach the device to plain surface.
4.1 Wall mounting
1. Fix the bracket (included in the delivery package) to the wall:
Figure 7 – Attaching the bracket to a wall
The figure shows the bracket allocation.
When installing the bracket, pass wires through the corresponding channels of the bracket, see figure
7.
Pass the wires into the corresponding grooves on the bracket while installing the bracket. Screw the
brackets to the device surface by using screwdrive.
2. Install the device
Figure 8 – Device installation (front view)
Connect cables to corresponding connector of the device. Description of the connectors is given in
section 2.4 Design.
Align the device and bracket together, fix the position, turning clockwise.
