WEP-2ac, WEP-2ac Smart. User manual
13
Figure 7 – Attaching the bracket to a wall
a. The figure shows the bracket allocation;
b. When installing the bracket, pass wires through the corresponding channels of the bracket, see figure
7;
c. Pass the wires into the corresponding grooves on the bracket while installing the bracket. Screw the
brackets to the device surface by using screwdrive.
2. Install the device.
Figure 8 – Device installation (front view)
1. Connect cables to corresponding connector of the device. Description of the connectors is given in Section
2.4 Design.
2. Align the device and bracket together, fix the position, turning clockwise.
3.5.2 Installing to false ceiling
It is not recommended to place the device inside a false ceiling as metal frame causes multipath signal
propagation and signal attenuation.