WB-15-W. User manual
33
•
•
•
•
•
•
•
•
•
•
•
decreasing of the parameter's value will reduce general bandwidth of wireless network. The parameter
takes values from 0 to 2347, by default – 2347;
Frame Aggregation
– enable support for AMPDU/AMSDU;
Short Preamble
– use of the packet short preamble;
WMM
– WMM support activation (Wi-Fi Multimedia);
Broadcast/Multicast Rate Limiting, p/s
– when the flag is set, transmission of broadcast / multicast traffic
over the wireless network is restricted. Specify the limit for broadcast traffic in the popup window (p/s).
Beamforming
– beamforming technology to customers (for 802.11n standard).
4.9 The «VAP» menu
In the «VAP» menu, you configure virtual Wi-Fi access points (VAP).
4.9.1 The «Summary» submenu
The «Summary» submenu displays the settings of all virtual Wi-Fi APs (VAP). You can see the settings of each
virtual AP in sections VAP0..3.
VAP0..3
– the sequence number of the virtual access point;
Enabled
– when the flag is set, VAP is enabled; otherwise, it is disabled;
Security Mode
– the type of data encryption used on VAP;
SSID
– virtual wireless network name;
Broadcast SSID
– when checked, SSID broadcasting is on, otherwise it is disabled;
Station Isolation
– when checked, station isolation from each other within the same VAP is enabled.
To apply a new configuration and save setting to non-volatile memory, press «Apply». Press «Cancel» to discard
the changes.
