_________________________________________________________________________________
_________________________________________________________________________________
132
Universal Network Terminal TAU-32M.IP
–
Code –
supplementary service code;
–
Activate –
service activation;
–
Deactivate –
service cancellation;
–
Option
– access code, used for service parameters' configuration and forwarding services–a number that the
call will be forwarded to;
–
Control
– service verification.
To discard all changes made to configuration, click the
Undo All Changes button.
To set the default values,
click the
Defaults
button. To apply changes, click the
Submit Changes
button. To store changes to non-volatile
memory of the device, click the
Save
button.
5.1.2.7
The Serial groups submenu
In
'Serial groups'
submenu, you may administer the call groups. You may configure up to 32 call groups in
total.
After implementation of changes, click the
Submit Changes
button; to discard all changes, click the
Undo All
Changes
button; to save changes, click the
Save
button.
You don't have to reboot the gateway in order to apply call group settings. Changing
'SIP port'
parameter will lead to termination of current calls. Changing other parameters will disrupt the
established connections for the current group only!
Call groups allow to perform call center features. Gateway supports 3 call group modes: group, delayed group
and search.
In group mode
, the call comes in to all free ports of the group simultaneously. When one of the group
members answers, call transmission to other ports stops.
In the delayed group mode
, the call comes in to the first free port in the group list, and then, after the specific
timeout, the next free port in the list will be added to the main one, etc. When one of the group members answers,
call transmission to other ports stops.
In the search mode
, the gateway continuously searches for a free group member, and the call is transferred to
their number.