Instruction for
multithread sensor SMG 156
Fitting
The thread sensor must be fitted so that the threads or wires are touching the
eyelets continuously. The movement will be best detected, if the thread or wire
deviates about 10–15° when it passes through the thread sensor eyelet. A thread
guide can be fitted to ensure this deviation.
Connection
* If connection is made via
screw terminal, the lid
must first be opened. See
instructions on next side.
The signal amplification
"Gain" is set with a
potentiometer in the
central control unit.
Please refer to the
instruction for the
central control unit you
are using.
Central control
unit
When two or more SMG thread sensors are used,
they will be connected in parallel.
Diese Anleitung ist auf Deutsch erhältlich, TH-0050.
Cette instruction est livrable en français TH-0051.
Esta instrucción está disponible en español, TH-0052.
