SMG Digital Gateway
247
Web interface users
In this block, you may configure web configurator access restrictions at the user level. There is always an
administrator for the system, that may add or remove users and assign the access level.
To create, edit or remove users, use the following buttons:
— 'Add user'
— 'Edit user parameters'
—
'Remove user'
The program denies modifications of administrator permissions
and his removal from the user list, so the system administrators may
have an assured access to the program.
–
[username]
— username for web configurator log in.
–
[group]
— user group type. This parameter should have 'webs' parameter.
–
[enter password]
— password for web configurator access.
–
[confirm password]
— confirm password for web configurator access.
To save the configuration, use
'Service' — 'Save configuration'
menu.
Setting administrator password for Telnet and SSH
In this block, you may change password for Telnet, SSH and
console access.
To change the password, enter a new password into
'Enter
password'
field and re-enter it into
'New password confirmation'
field.
To apply the password, click 'Set' button.
3.1.26
View factory settings and system information
For viewing, use
'Help' — 'System information'
menu.
Also, factory settings are listed on the label located in the lower part of the device housing.
To view the detailed system information (factory settings, SIP adapter version, current date and time,
uptime, network settings, internal temperature), click Home link in the control panel.
3.1.27
Exit the configurator
Click 'Exit' link to exit the configurator.
3.2
Command line, list of supported commands and keys
SMG features several debug terminals, each of them is designed for a
specific function:
–
Terminal (COM port)
— enables device configuration and firmware update via CLI (command line
interface).
–
Telnet port 23
— terminal (COM port) duplicate.
–
SSH port 22
— terminal (COM port) duplicate.
