10
BA-en-2015-1910_R55
2. Safety
The units have been designed, built and tested using state-of-the-art engi-
neering, and have left the factory in a technically and operationally safe
condition. If used improperly, the units may nevertheless be hazardous to
personnel and may cause injury or damage. Read the operating instruc-
tions carefully and observe the safety instructions.
2.1 Proper Use
The ion blower head R55 and the ion blower pistol PR55 must be used
only for discharging static surfaces, for separating stacked or wound
sheets, and for cleaning dusty surfaces.
The ion blower heads R55 and the ion blower pistol PR55 must be opera-
ted only together with the 5 or 6 kV AC Eltex power supplies which ensure
an optimum match with the required operating conditions. Other uses are
not permitted.
The manufacturers will not assume any liability and warranty if the units
are used improperly or used outside the intended purpose.
Modifications or changes made to the devices are not permitted.
Use only original Eltex spare parts and equipment.
2.2 Identification of risks and hazards
Possible risks and hazards resulting from the use of the units are referred
to in these operating instructions by the following symbols:
Warning!
This symbol appearing in the operating instructions refers to operations
which, if carried out improperly, may result in serious personal injuries.
Caution!
This symbol appearing in the operating instructions refers to operations
which, if carried out improperly, may result in damage to property.