50
User Manual, Part III
Subscriber access/aggregation node МA4000-РХ
11.5
Viewing and Changing User Access Rights
To manage user access rights, user priority system is implemented.
When a user is created, minimal rights are delegated to him:
ma4000(config)# user operator
ma4000(config)# do show users
System users
~~~~~~~~~~~~
User name User privilege level
-------------------- ----------------------------------------
root 15
admin 15
remote 15
linux 0
operator 0
5 system users.
To change user password, use the
user
command. Pass the user name and the new password as
parameters.
ma4000(config)# user operator privilege 15
ma4000(config)# do show users
System users
~~~~~~~~~~~~
User name User privilege level
-------------------- ----------------------------------------
root 15
admin 15
remote 15
linux 0
operator 15
5 system users.
11.6
Deleting a User
For deleting a user, use the
no user
command in the
configure
view
. The command takes the
user’s name as a parameter:
ma4000# configure terminal
ma4000(config)# no user operator
ma4000(config)# do commit
11.7
User Session Configuration
Timeouts are used to limit the duration of CLI sessions. If no commands are executed before the
timeout, the session will be closed automatically. Use the
cli session-timeout
from the
configure view
command. Pass the time period in minutes as a parameter.
ma4000(config)# cli session-timeout 300
Summary of Contents for MA4000-PX
Page 9: ...User Manual Part I 9 МA4000 РХ Subscriber Access and Aggregation Point PART I GENERAL ...
Page 87: ...User Manual Part IV 87 Subscriber access aggregation node МA4000 РХ PART IV ONT CONFIGURATION ...
Page 163: ...User Manual Part VI 163 Subscriber access aggregation node МA4000 РХ PART VI MAINTENANCE ...
