136
User Manual, Part IV
Subscriber access/aggregation node МA4000-РХ
Step 1. Set the "management" type in the "cross-connect" profile.
ma4000(config)# profile cross-connect TR069
ma4000(config-cross-connect)("TR069")# type management
Step 2. Set the "ont" model of the "cross-connect" profile. Specify a separate bridge-group.
ma4000(config-cross-connect)("TR069")# bridge
ma4000(config-cross-connect)("TR069")# bridge group 20
Step 3. Set the "IP Host" identifier to 0.
ma4000(config-cross-connect)("TR069")# iphost eid 0
Step 4. Check the changes by using the
do
show
command.
ma4000(config-cross-connect)("TR069")# do show profile cross-connect TR069
Name: 'TR069'
Description: 'ONT Profile Cross Connect
10'
Model: ont
Bridge group: 20
Tag mode: single-tagged
Outer vid: 1
Outer cos: unused
Inner vid: -
U vid: untagged
U cos: unused
Mac table entry limit: unlimited
Type: management
Iphost eid: 0
Priority queue: 0
Step 5. Apply the changes by using the
do commit
command.
ma4000(config-cross-connect)("TR069")# do commit
34.4
TR-069 Client Configuration
The
management
profile is used for TR-069 client configuration.
ma4000# show profile management management-00
Name: 'management-00'
Description: 'ONT Profile Management 0'
Enable omci configuration: true
Url: ''
Username: ''
Password: ''
If DHCP server transfers TR-069 parameters using option 43, there is no need in sending the
parameters to OMCI. Set the Disable this phrase by using no omci-configuration command.
Otherwise, parameters of the TR-069 client require explicit specification.
Step 1. Enable TR-069 configuration.
Summary of Contents for MA4000-PX
Page 9: ...User Manual Part I 9 МA4000 РХ Subscriber Access and Aggregation Point PART I GENERAL ...
Page 87: ...User Manual Part IV 87 Subscriber access aggregation node МA4000 РХ PART IV ONT CONFIGURATION ...
Page 163: ...User Manual Part VI 163 Subscriber access aggregation node МA4000 РХ PART VI MAINTENANCE ...
