___________________________________________________________________________
_______________________________________________________________________________
LTP-8X optical line terminal
39
Chapter 12.
User Management
Introduction
This Chapter is devoted to management of the terminal users.
The factory settings provide only for one user, i.e. the device administrator.
login: admin
password: password
When you start to configure the terminal, we recommend you to change the password
of the "admin" user.
For security reasons, terminal users should be delegated with a strict rule set. For these purposes, each
user gets his own access level. Level 0 corresponds to a minimum rule set, Level 15—to a maximum rule
set.
CLI commands are ranked by the access level. Level 0 commands are available to all users. Level 15
commands are available only to Level 15 users. Thus, level of commands available to users will not
exceed the user level. Table 12.1 contains the list of commands and the required access level.
Table 12.1. CLI commands and the required access level
Command
Level
clear ...
15
commit
15
configure
15
copy ...
15
date
15
default
15
delete firmware ont
15
mac ...
15
