169
LTP-8X(config-cross-connect)("TR069")# bridge group 20
Step 3.
Set the
IP Host
identifier to 0.
LTP-8X(config-cross-connect)("TR069")# iphost eid 0
Step 4.
Check the changes by using the
show
command.
LTP-8X(config-cross-connect)("TR069")# do show profile cross-connect TR069
Name:
’TR069’
Description:
’ONT Profile Cross Connect 1’
Model:
ont
Bridge group:
20
Tag mode:
single-tagged
Outer vid:
1
Outer cos:
unused
Inner vid:
-
U vid:
untagged
U cos:
unused
Mac table entry limit:
unlimited
Type:
management
Iphost eid:
0
Priority queue:
0
LTP-8X(pon/profiles-ont/cross-connect-6)>
Step 5.
Apply the changes by using the
commit
command.
LTP-8X(config-cross-connect)("TR069")# do commit
35.3
TR-069 Client Configuration
A
management
profile is used to configure TR-069 clients.
LTP-8X# show profile management management-00
Name: 'management-00'
Description: 'ONT Profile Management 0'
Enable omci configuration: true
Url: ''
Username: ''
Password: ''
If DHCP server transfers TR-069 parameters using option 43, there is no need in sending the parameters
to OMCI. Disable this phase by using the
no omci-configuration
command.
Otherwise, parameters of the TR-069 client require explicit
specification.
Step 1.
Enable TR-069 configuration.
LTP-8X(config)# profile management management-00
LTP-8X(config-management)("management-00")# omci-configuration
Step 2.
Specify connection parameters.
Summary of Contents for LTP-4X
