ESR-Series. User manual
535
•
•
•
•
•
•
Step
Description
Command
Keys
13
Enable registration of changes to the
user settings (optionally).
esr(config)#logging userinfo
17.5.2 Configuration example
Objective:
Configure message sending for the following system events:
failed user authentication;
changes to the configuration of logging system events;
start/stop of the system process;
changes are made to the user profile.
ESR router IP address: 192.168.52.8, Syslog server IP address: 192.168.52.41. Use default settings for sending
messages – UDP protocol, port 514.
Solution:
First, do the following:
Specify zone for gi1/0/1 interface;
Configure IP address for gi1/0/1 interface.
1 Main configuration step:
Create a file on the router for syslog, the level of messages for logging – info:
esr(config)# syslog file ESR info
Specify the IP address and parameters of the remote Syslog server:
esr(config)# syslog host SERVER
192.168
.
17.30
info udp
514
