Primer
4
gas-lab
Q1
Page 27
4.3
… check all parameter settings?
The parameterisation of a
gas-net
device contains too many settings for them to
be conveniently displayed via the operator panel. It is much easer to get a
general idea of the device settings with the aid of the GW-GNET+
parameterisation program and a laptop.
Proceed as described below:
1. Connect the COM interface at the PC to the DSS interface of the Q1
evaluation computer using a parameterisation cable.
2. Start GAS-WORKS on your computer. Activate the communication program
by clicking the
Import
– Data interface
tool in the GW-BASE toolbar.
3. After having successfully started the communication program, you are
linked with the connected device data technology-wise. The window
appearing on your display shows some important basic device information.
4. Select the
Tools
tab now.
Double-click the
Change parameters
or the
Edit parameterisation
entry.
The GW-GNET+ interface will appear on the screen. This is where you can
invoke and check the parameter listings of the individual modules.
Consult the GW-GNET+ online help for details on the operation of the user
interface of GW-GNET+.
Please note:
The
Change parameters
or
Edit parameterisation
service
programs also offer the option of changing device settings. The current status of
the protection mechanisms (calibration switch / user lock) is of course taken into
consideration. Please refer to the GW-GNET+
comprehensive online help for
further information.