4
Primer
Page 26
gas-lab
Q1
4.2
… accept the gas quality measurement errors?
Errors can only be accepted and thus removed from the gas quality error listing
if they are no longer pending.
To accept an error, proceed as follows:
1) Open the error listing via the menu as described above in Chapter 4.1.
2) Select the error you want to accept via the rightward or leftward arrow key.
3) Press the Menu key. If the error indicated on the display cannot be
accepted, the first menu item appears as being crossed out:
Accept
. In this
case, press the Menu key again to quit the menu.
If the error can be accepted, just select
Accept
and press the Enter key.
The error disappears from the error listing, and the error with next lower
priority level will be indicated on the display.
4) Repeat the steps explained above to accept further errors.
Note:
Accepting errors as described above only refers to errors in connection
with the device’s gas quality functions. How to accept messages of the general
message processing (
Monitoring
error listing) is explained in Chapter 5.3.