Elsteam UH06-OEM, User, Installation And Maintenance Manual, Page: 7 / 12

7
Elsteam S.r.l - via E.fermi, 496 - 21042 Caronno Pertusella (va) - Tel.+39 02 9659890 - Fax +39 02 96457007
E-mail: infocomm@elsteam.com/infotech@elsteam.com - Web: http://www.elsteam.com
p.iva 01463940120 - c.f.05046150156 - trib.di busto a. 16415-c.c.i.a.a. varese 174164 - cap.soc.i.v. euro 10400,00
Mains transformer Connections
0V BLUE cable Electronic Board
12/14V RED cable Electronic Board
48/59V VIOLET cable Electronic Board
0V FASTON Circuit breaker
220V FASTON Circuit breaker
 Each connection of terminal will have to be firmly protected by a fixing of cable.
The electric terminals are positioned inside the apparatus (remove the screws which block
the lower panel of the case to reach them).
In case the mains transformer is not delivered already connected to the humidifier, please
use table below to connect.
Figure 1
shows positioning of electrical terminals on the electronic board.
Before the beginning of installation (and all operations of
maintenance and maintenance without panel) the power supply
must be disconnected on all the lines and insured against an
involuntary connection! Before making electric connections check
that the tension corresponds to those of the humidifier!
Figure 1 - Electronic Board
0V
220V
48V 0V 14V