Elsteam KT Series, Manual, Page: 9 / 40

924KTE4.01 - KT series humidifiers 05/2021 |9|
2. TECHNICAL DATA
2.1 Technical specifications
Description M.U. KT3 KT10-230 KT20-230 KT5 KT10 KT20 KT30 KT40 KT60
Steam production
Production capacity
kg/h 3 10 20 5 10 20 30 40 60
Maximum pressure
MPa
(mmH
2
O) 0.002 (200)
Pipe connection external
diameter
mm (in.) 40 (1.57)
Steam distribution
Number of linear distributors
that can be connected
--- 1 1 2 1 1 1 1 2 2
Number of steam blowers that
can be connected
--- 1 1 / 1 1 / / / /
Electrical properties
Power consumption
kW 2.25 7.5 15 3.75 7.5 15 22.5 30 45
Power supply Vac,Hz 230V,50Hz 400V,50Hz
Phases Ph 1 3 3 2 3 3 3 3 3
Current per phase A 10 19 38 9 11 22 32 43 65
Water properties
Inlet water quality
--- See "5.2.1 CHARACTERISTICS OF WATER" ON PAGE 13
Inlet water conductivity μS*cm 70…1250
Inlet water hardness °f 5...50
Inlet water pressure MPa/bar 0.2...1/2...10
Inlet water connection --- 3/4"GAS
Water drain external dimensions mm (in.) 42 (1.65)
General characteristics
Dimensions
mm (in.) See "4.1 DIMENSIONS" ON PAGE 11
Weight kg 15 25 15 25
Hydraulic unit IP protection --- 20
Regulation
Type of controller
--- Built-in
Command signal --- Proportional(0-10V)orON-OFF
Compliance
CE certification
--- √