THURSDAY, 27 FEBRUARY 2014
PAGE 20 OF 31
EMS75VR-ROYAL-VENDING-INSTALLATION AND USER GUIDE-ISS3
6.0
How to run the test routine
6.1
Test routine
The user interface for the ems75vr is as follows:
Defrost
Up
Set
Down
The LED indicators are as follows:
1.
Saving temperature disable
2.
Motion detection
3.
Compressor.
Run the test routine as follows:
1.
Enter the password as follows:
A.
Press Set and ensure that the display shows PAS.
B.
Press Set three times (x3)
C.
Press Up twice (x2)
D.
Press Down once (x1)
E.
Press Defrost four times (x4)
F.
Ensure that display shows PS.
2.
Scroll to tst and press the Set button. The display changes to rEL for the relay tests.
3.
Press the Down button to start the relay tests and then test the relays as described in the table.
