52
Parameter setting
Sensor Vari KNX 3L-TH-D
• Status: 19.10.2016 • Errors excepted. Subject to technical changes.
Information on air pressure
The unit for air pressure is Pascal (Pa).
1 Pa = 0,01 hPa = 0,01 mbar
The air pressure is specified as "normal air pressure" or as "barometric pressure". The
normal air pressure is the pressure compensated for height and temperature. The ba-
rometric air pressure is the pressure measured directly by the sensor (without compen-
sation).
6.14. Wind threshold values
Activate the wind threshold values required (maximum four) The menus for the further
setting of the threshold values are then displayed.
6.14.1. Wind threshold values 1-4
Threshold value
Set, in which cases threshold values and delay times received are to be kept per object.
The parameter is only taken into consideration if the specification/ setting by object is
activated further down. Please note that the setting "After power restoration and pro-
on change of
(if sent on change)
10 Pa • 20 Pa • 50 Pa • 100 Pa • 200 Pa •
500 Pa
Send cycle
(if sent periodically)
5 s ... 2 h; 1 min
Use minimum and maximum value
No • Yes
Air pressure
(in Pa)
Meaning
Weather tendency
up to 98,000 Pa
very low
stormy
98,000 ... 100,000 Pa
low
rainy
100,000 ... 102,000 Pa
normal
changeable
102,000 ... 104,000 Pa
high
sunny
104,000 Pa:
very high
very dry
Threshold value 1/2/3/4
No • Yes
Summary of Contents for Vari KNX 3L-TH-D
Page 5: ...4 Clarification of signs ...
